Instech Blog

Infusion

Advances in Rodent Infusion: From Pumps to Patency As presented during AALAS Demo Days 2026 Watch this video from AALAS Demo Days 2026 where we begin with an overview of Instech Laboratories, Inc. and ... Read Post
Guide to Understanding Syringe Pumps in Preclinical Infusion Studies Delivering an accurate, consistent dose in preclinical infusion studies requires far more than choosing a pump with an impressive specification. ... Read Post
The Interface Between Syringe Pump and Human In the first blog post in this series we identified over 40 potential sources of error when a syringe pump delivers a dose, all of which we ... Read Post
Syringe Pump Accuracy in Preclinical Infusion Studies The pump’s accuracy specification is only a small part of the story. Syringe pumps are widely considered to be the most accurate devices for ... Read Post
Flow Rate Limits of Rodent Infusion Sets Introduction Small tubing is used for rodent infusion because of the low dead volume and to match the size of rodent vessels. Restrictions of 0.010in ... Read Post
Round-Tip Catheters Improve Patency The use of round- or square-tip catheters for rodent vascular catheterization and the resulting impact on patency has been a debate among research ... Read Post
Are Open Luer Connections Compromising Your Research? For research infusing or sampling from laboratory animals, keeping the fluid path sealed off from bacteria and air is critical for maintaining ... Read Post
Three AALAS 2020 Posters Focus on Vascular Access Buttons™ Researchers continued to present their refinements to rodent infusion and sampling using Instech Vascular Access Buttons™ (VAB™) at this year’s ... Read Post
Prev 1 Next

Don't Miss a Post!

Topics

View all topics
© 2026 Instech Laboratories, Inc. All Rights Reserved.